Skip to content

How to get a forklift licence in Australia

Updated 17 Nov 2026

A forklift licence in Australia is a high risk work licence with the forklift truck class, LF. The training is national, but the licence comes from your state or territory regulator, and each has its own application steps and fees.

This guide covers what is the same everywhere, then links to each state. Every fact here is from a regulator or training.gov.au page, linked below.

1. Check you are eligible

Every regulator we checked sets a minimum age of 18. Several also require enough English to do the work safely. Some, such as SafeWork SA, NT WorkSafe and Access Canberra, expect you to live in their state or territory.

2. Train with a registered training organisation

The course is the national unit TLILIC0003 Licence to operate a forklift truck. Choose an RTO that has it on scope for your state: every provider on Licence Hunter does, according to training.gov.au.

In NSW, SafeWork NSW also approves RTOs to deliver high risk work training, so ask the provider to confirm it. In the ACT, the provider must be authorised to deliver the course in the ACT.

3. Pass the assessment

The unit says the National Assessment Instrument is the mandated assessment for the licence. SafeWork SA describes it as a written theory exam and a practical test, run by an assessor accredited with the regulator. NSW adds a step before the assessment: you apply online for an assessment enrolment number.

4. Apply to your regulator, usually within 60 days

After a successful assessment you get a notice of assessment. Most regulators give you 60 days from then to apply:

  • NSW: apply online within 60 days of your Notice of Satisfactory Assessment, then have your photo taken at Service NSW.
  • Victoria: lodge within 60 calendar days through myWorkSafe or at Australia Post, or you redo the assessment at your own cost.
  • Queensland: apply within 60 days of a successful assessment.
  • WA: you can work for 60 days from your notice, and keep working if you applied within that time.
  • SA: take your invoice to Service SA or an Australia Post Photopoint within 60 days.
  • ACT: your statement of attainment must be dated within 60 days of your application, lodged in person.
  • Tasmania and NT: apply to WorkSafe Tasmania or NT WorkSafe with their application forms.

5. Pay the licence fee

The licence fee goes to the regulator and is separate from the course fee. Published fees for a new licence: NSW $95 per class (2026–27), Victoria $77.70 per class (as shown in November 2026), WA $92 ex GST (updated July 2026), SA $101 (2026–27), ACT $121 (2026–27), NT $92 (2026–27). We couldn't verify the current Queensland and Tasmanian fees; see their state pages for links.

Questions

Can I drive a forklift while I'm training?

Yes, under supervision. SafeWork NSW says you don't need a licence while training towards one under the supervision of a licence holder, and Access Canberra says the same.

Do I need a car driver licence to get a forklift licence?

None of the regulator pages we checked list a driver licence as a requirement. Some list it as one of the identity documents you can use.

Sources

Checked 17 November 2026.

More guides